750 Redna Terrace
Cincinnati, OH 45215, USA
Telephone: 513-772-0404
Fax: 513-672-3333
Email: sales@mhi-inc.com

Online Store | MHI

 

Gen2 HeatPad with 3.5" Diameter Hot Zone (400W)

Gen2 HeatPad with 3.5" Diameter Hot Zone (400W)
Gen2 HeatPad with 3.5" Diameter Hot Zone (400W) Gen2 HeatPad with 3.5" Diameter Hot Zone (400W) Gen2 HeatPad with 3.5" Diameter Hot Zone (400W)
Brand: Micropyretics Heaters International
Product Code: PH-G4-3.5
Price: $2,525.00 $1,925.00

Available Options


Control Panels:

Transformers:

Crucibles:

Setter Disc:

Qty:     - OR -   Add to Wish List
Add to Compare

HeatPad™

  • *NEW* Internal K-Type TC Standard (included)
  • 3.5" diameter hot zone
  • Rapidly heat area to 1050°C (Internal temperature).  Caliberation provided in manual for T/C.
  • Up to 1000°C surface temperature
  • Voltage - 40V
  • Maximum Current - use up to 11.5 Amps (depending on load).  Special Glass to on GEN 2.
  • Non-reactive CerAll™ ceramic pocket
  • Low profile


Thermal shock resistant, high density NanoFractalAlumina™ translucent setter plates and crucibles (sold separately). For Alumina boats visit our Alumina pages.

For HeatPad™ ceramic repairs, please use FractalPaste

Warning: This is an electrical device which can achieve very high temperatures. Please follow all local codes and safety procedures. Consult your local electrician to review and be aware of safety hazards present when working with electrical devices. This device can reach temperatures in excess of 1200°C. Please use caution to avoid burns or fire hazards. Note that as you place insulating materials on the heat pad the maximum temperature is achieved with lower currents than when the heat pad is free-radiating. All users should control the heat pad properly in order not to exceed the maximum rated temperature on the pad surface. Not to be used inverted.  Both the maximum temperature and maximum current should be monitored.

MHI BPAN-O-120T-2014™ PID Digital Control Panel with full electronics  Electronic Control Unit. PID temperature control.  Precise control with advanced adaptive tuner for handling processes with changing characteristics. Stabilizes the controlled temperature against supply voltage fluctuations on electrically heated load.  Compatible with MHI-DACS Data Acquisition and other third-party data acquisition software.

The controller interfaces with SCR, soft start and I2t fuse for smooth power control and protection. Easy to connect to electrical using (quick connect) connectors. Wiring requirements:  120Volt, single phase @50/60Hz, 25Amp Max current

MHI ST9001 single phase SCR (or equivalent) with advanced current limit and soft start feature.

Wiring requirements:  240 Volt, single phase @50/60Hz, 25Amp Max current(if voltages of 208V or 220V are desired, please indicate at time of order)

Maximum power output is 6kW (@220Volts).

Tags: HeatPad
Powered By OpenCart
Micropyretics Heaters International © 2017