750 Redna Terrace
Cincinnati, OH 45215, USA
• Continuous use temperatures up to 1760°C
• Working Chamber Size 8"L x 9"W x 9"D (wall-to-wall)
• MHI Molybdenum disilicide heating elements
• Standard temperature controller programmable with 16 segments
• Full furnace electronics included: MHI HIPAN-2014™
• Furnace Power 8kW (No Load Steady State Power, ~4.4kW)
Customer must specify wiring requirements.
MHI HIPAN-2014™ Control Panel Details:
MHI HIPAN-2014™ control panel with full furnace electronics.
The control panel houses switch gears, fuses, and circuit breaker.
Standard Controller: Eurotherm 2404 Programmable Temperature Controller for
heating process. Featuring 1/4 DIN digital display of set point and process
temperature, PID temperature control, adaptive tuning.
Programming Capability: 1 program with 16 Segments.
Eurotherm 2116 over-temperature controller.
Compatible with MHI-DACS Data Acquisition and other third-party data acquisition software.
MHI ST9001 single phase SCR (or equivalent) with advanced current limit and soft start feature.
Wiring requirements: 240 Volt, single phase @50/60Hz, 55Amp Max current (if voltages of 208V or 220V are desired, please indicate at time of order)
Maximum power output is 12kW.
For more information please visit our H18-40BLE Furnace page.
MHI offers Academic and Industrial discounts. Please call or email for information.
Furnace Model: MHI Model #H18-40BLE Bottom Loading Box Furnace
Chamber Size: 8"H x 9"W x 9"D. Wall to wall.
Outside Dimensions: 37"H x 24"W x 19"D
Door Opening: 6"D x 5.5"W
Motorized Door Option: 0.1 HP Motorized door with Acme Lead Screw and Frelon Square Bearings. Motorized door is operated at the Control Box.
Maximum Furnace Temperature: Continuous use up to 1760°C.
Heat Up Time: Approximately 90 minutes with no load
Refractory: Safe FiberFree™ and vacuum formed fibrous refractory
Heating Elements: MHI MP1850™ energy efficient U-shaped molybdenum disilicide heating elements.
Element Installation: Top mounted. Convenient installation.
Thermocouple: MHI E2-Type with sheath.
Controller: Standard: Eurotherm 2404CP programmable with 16 segments. Optional: Eurotherm 2404P4 with 4 programs: 16 segments each with digital communication card. This communication card allows continuous data download to computer.
Control Electronics Package: MHI HIPAN-2010™ Control System
Thyristor Power Controller: MHI Model #ST9001 SCR or equivalent
Furnace Casing: Fan cooled, double walled and stainless steel.
Furnace Power: 8kW. (No Load Steady Power, approximately 4.4kW)
Wiring Requirements: 240 Volt, single phase @50/60Hz, 55Amp Max current (if voltages of 208V or 220V are desired, please indicate at time of order)
Safety Features: Protected by over-temperature controller with independent thermocouple. Over-temperature controller also provides door open permissive to open door only below a set point. Recommended at 600°C. (Override possible and customer changeable) Manual reset is required if system is overheated. Complete fuse and circuit breaker protection provided.
Furnace Assembly: Installation of elements by customer on site. Main connections to be done by certified electrician according to local electrical codes.
Manual: Detailed furnace installation, troubleshooting and operation manual provided.