750 Redna Terrace
Cincinnati, OH 45215, USA
• Continuous Temperature Range: 1400°C
• Chamber Size Maximum is 3" Top/ Bottom Opening diameter x 8" L. Please specify if diameter required is lower.
• Processing tube and stand are not included.
• MHI Nano Structured GAXP® elements
• Standard temperature controller programmable with 16 segments.
• Includes full furnace electronics: MHI BPAN-O-PLUS Control Panel. (Process and overtemperature controllers)
• Furnace Power 3.5 kW (No load steady state power ~2 kW)
MHI BPAN-O-Plus control panel with full furnace electronics.
The control panel houses switch gears, fuses, and circuit breaker.
Standard Controller: Eurotherm or equivalent Programmable Temperature Controller for heating process.
Featuring 1/16 DIN digital display of set point and process temperature, PID temperature control, and adaptive tuning.
Programming Capability: 1 program with 16 Segments
Eurotherm or equivalent over-temperature controller.
Compatible with MHI-DACS Data Acquisition and other third-party data acquisition software.
MHI ST9001 single phase SCR (or equivalent) with advanced current limit and soft start feature.
Wiring requirements: 240 Volt, single phase @50/60Hz, 25Amp Max current (if voltages of 208V or 220V are desired, please indicate at time of order)
Maximum power output is 6kW (@220Volts).
Processing tube and stand are not included.
Furnace Model: MHI Model #3H14VST-GAXP Muti-axes Split Tube Furnace
Chamber Size: 3" Top/ Bottom Opening diameter x 8" Length. Processing tube and stand are not included.
Overall Furnace Dimension: 18"D x 20"L
Continuous Temperature Range: 1400°C
Heat Up Time: Approximately 60 minutes with no load and no tube.
Refractory: Vacuum formed fibrous refractory.
Heating Elements: MHI GAXP® Nanostructured heating element.
Element Installation: Top mounted. Convenient installation.
Controller: Standard: Eurotherm or equivalent programmable with 16 segments Optional: Eurotherm or eqUIVALENT with 4 programs: 16 segments each with digital communication card. This communication card allows continuous data download to computer.
Control Electronics Package: MHI BPAN-O-Plus-2014™ Control System
Thyristor Power Controller: MHI Model #ST9001 SCR or equivalent
Furnace Casing: Stainless steel with perforated top.
Furnace Power: 3.5 kW (No Load Steady State Power, approximately 2.0 kW)
Wiring Requirements: 240 Volt, single phase @50/60Hz, 35Amp Max current (if voltages of 208V or 220V are desired, please indicate at time of order)
Safety Features: Protected by over temperature controller with independent thermocouple. Manual reset is required if system is overheated. Complete fuse and circuit breaker protection is provided.
Furnace Assembly: Installation of elements by customer on site. Mains connections to be done by a certified electrician according to local electrical codes. Furnace provided with mounting blocks for versatile attachment to structures. Stand is optional.
Manual: Detailed furnace installation, operation and troubleshooting manual provided.