HGA-M-04 Superheated Steam/Air/Gas Generator (4KW)
$8,200.00
- Model: HGA-M-04
- Manufacturer: Micropyretics Heaters International
Description
THE HGA-M-04 is a unique device that provides low to high-humidity air or gases like CO2, N2, Ar, and He mixture with H2O. The maximum power is 4KW for this unit. A high-temperature superheated mix of steam-air or steam-gas output. Note that the parameters for air and steam are given in the Unit Features tab. The unit has adjustable humidity.
The high-humidity steam/air mixtures will have varying temperatures depending on the mix. Please review the unit features in the adjacent tab.
Superheated steam is an odorless high-temperature gas (not to be confused with hot water mist). OPUMP-1 (water pump) is a highly recommended option for metering the water flow. Several more options are available and recommended. The airflow control option (flow meter) is generally required.
The BPAN-O-PLUS option is required only if power adjustment is contemplated. Please ensure minimum air and water flow to prevent burnout without the power controller in use.
Voltage: 240 VAC. Please indicate the request on the pull-down menu in the selected options.
Current: Approx. 18 Amps @ 240VAC
Power Consumption: ~4000 Watts
The size envelope is approximately as follows:
Dimensions are about 18″ long and 5.5″ in diameter.
Exit: Threaded exit nozzle 2″ NPT Male, for steam/gas mixture
Inlet: Threaded inlet nozzle 1/2″ NPT Male, for gas
Safety precautions must be taken when dealing with hot gasses, including steam.
Safety: PLEASE DO NOT USE UNIT ON COMBUSTIBLE LIQUIDS. THE DANGER OF SUPERHEATED STEAM SHOULD BE WELL UNDERSTOOD. PLEASE WEAR GLOVES, GLASSES AND A HARD HAT. PROTECTIVE CLOTHING IS REQUIRED. STEAM CAN PENETRATE CLOTHES. Patents applied and pending.
Installation: Installation and use manual provided with the product. The airflow generator is in the user’s scope.
Options: Control thermocouple for the hot air generator part is included. An electrical 240V 50/60Hz supply is required for this unit. 4 KW system requires compressed gas input. Compressed gas is user scope.
Picture of TC, TC Extension Wire, and Stand in Packaging.
Typical Use: Where high temperature and high humidity steam is used, such as antimicrobial, soil, drying of ceramics, and sanitation. Use also for process simulation. Please note that for scientific R&D humidity products we recommend a combination of HGA and LTA units.
For NeverDown(TM) unit -replacements, please contact MHI at [email protected] at 513-772-0404 with the serial number.
Please click on the specifications tab for a typically expected performance at a known setting. Not all the setting widows for power mixture and temperature are known.
If the BPAN-O-PLUS power controller is not purchased, maximum power will require a minimum of 9 to 10 SCFM Airflow or N2 flow.
The temperature is controlled by water flow, airflow, and power controller (if purchased)
Potential uses: For drying, cleaning, layering, epoxy drying and other film uses where superheated steam is required at one atmospheric pressure. Ideal for steam drying or steam oxidation. Product has uses in surface technologies, cleaning technologies, drying technologies, curing technologies, nano technologies. Attempt use also for precipitating crystals of several small sizes including nano crystals from solutions. Precipitation droplet sizes may be controlled by controlling rate of cooling, impingement conditions and type of surface.
High Humidity Control: Steam temperature and the relative mass of moisture in steam-air mixture (specific humidity) depends on water valve setting and air inflow setting. This unique device can give more than 40% specific humidity at temperatures greater than 100C (compare with a specific humidity of less than 3% in fully saturated air at room temperature i.e. air with RH=100%).
Typical settings: This unit requires a compressed air source and a metered water pump like the O-Pump-1. Setting:
(Full power of 4 kW):
- Please note that the dimensions of the control panel will differ for specific panel ratings for cUL and others.
At 8 SCFM Air or Nitrogen and 0 g/min water, the exit temperature is ~850C. These are approximate values.
At 8 SCFM Air or Nitrogen and 29g/min water, the exit temperature is ~600C. These are approximate values.
At 8 SCFM Air or Nitrogen and 14g/min water, the exit temperature is ~720C. These are approximate values.
At 8 SCFM Air or Nitrogen and 40g/min water, the exit temperature is ~400C. These are approximate values.
The user is required to provide an air flow device from a compressor or gas bottle and regulate the flow with a flowmeter.
The unit comes with a manual that has comprehensive valve setting data for the water (manual available only with purchase). These settings may vary with use and other conditions. The values above should be considered approximate. Your results may vary with the unit and the type of use.
Options: Control Thermocouple for the hot air generator part is included. Steam output temperature depends on the amount of steam and could be up to 600C. The unit requires 10 SCFM air. Thermocouple and bracket are sold separately or user may provide their own on their part. An Electrical 240 50/60Hz supply is required for this unit. 4 KW system requires compressed air input.
OPUMP 1 Specifications
- The water inlet pipe is 1/8”. It is provided with a pump.
- Settings from 8ml/min to 100 ml/min.
- 120V 50/60Hz
- Size envelope is 6”(D) x 6”(W) x3”(H)
- Weight is ~700gms
BPAN-O-PLUS Specifications
- BPAN-O models have a UL microprocessor (PID) programmable controller (An over-temperature controller included in all BPAN-O-PLUS models)
- Best soft start and current limit included
- Over-temperature controller available in BPAN-O-PLUS
- Durable enclosure for Models (weight is approx. 14 kg for models)
- Optional: Digital communications RS232/485 120V and 220V/ models as quoted.
- 220V Bpan models up to 6-8 KW. The 120V models up to 1.5KW.
- Fan or power controller in some models
- SCR power controller with current limiter (extended soft start) please call for details
- Plug-and-play Data Acquisition System (optional) – MHI DACS
- Remote on/off (optional)
- BPAN Dimension: 8 1/2” (H) x 12 ¼”(D) x 19 7/8”(W) (Includes Conduit Connector Extender in the depth dimension).
- Please note that the dimensions will differ for specific panel ratings for cUL and others.
At 8 SCFM Air or Nitrogen and 0 g/min water, the exit temperature is ~850C. These are approximate values.
At 8 SCFM Air or Nitrogen and 29g/min water, the exit temperature is ~600C. These are approximate values.
At 8 SCFM Air or Nitrogen and 14g/min water, the exit temperature is ~720C. These are approximate values.
At 8 SCFM Air or Nitrogen and 40g/min water, the exit temperature is ~400C. These are approximate values.
Q: When do you dry with steam instead of drying with hot air?
A: There are many benefits to using steam but the main one is the availability of a gas with a lot of stored enthalpy at a lower temperature than corresponding dry air with the same enthalpy. So if you were interested in drying paper which has an ignition temperature of say 450°F, then the use of superheated steam at a much lower temperature may produce the same drying efficiency as hot air at a high-temperature which could be in excess of the paper ignition temperature.
Q: Is steam drying energy efficient? Is it better?
A: The answer is YES in many applications. Compared to boiling in hot water to remove dirt, superheated steam is faster and may not require the subsequent drying operation thus saving you time and money. There is also the possibility that because of the large enthalpy content and higher than 100C steam temperature, the cleaning could be more efficient, reach tough to clean spots, and eliminate more.
Patents applied and pending.
Detailed installation and use manual provided with product.
Some lead time, about 3 to 4 weeks, on this product may be encountered because of the high demand.
Control thermocouple for the hot air generator part is included. Steam output temperature thermocouple and bracket is sold separately or user may provide their own on their part. Electrical 110-120V 50/60Hz supply required for this unit. This 1KW system requires compressed air input and water input.
Steam Products
J.K., One of the largest US Company for CPG and health care goods
Worked beautifully – … Thanks.
J.M, Billion Dollar US Company
“I have finally had a chance to work with the heater (steamer); it is performing fairly well.”
Buyer at large World AE company.” I personally ….. love to have you as our supplier……”
J.B., Major US University
“… he was a great help and recommended the HGS product line.”
M.W., Major US University
Ours (HGA-S) seems to be working fine ….
F. ., Major Canadian University
Hello … I ran the steam generator and the CX1300 unit this afternoon…………….. the CX1300, both pieces of equipment worked well. Thanks for the pdf on the controllers. Now that I know that everything is working, please tell……..that I will forward him some pictures of my modifications.
S Compnay, U.K.
…We used the HGA2 as a research and development tool for our surgical devices. The HGA2 steam device performed well for us. It was used up to heat various plastics and materials up to 400°C with steam.”
Robust Radiator™
M.O., National Laboratory
“…the heating system that you helped me set up is working great!”
E.B., University
“…Robust Radiator is working perfect as a Crucible heater.”
L.C., Canada
“We just received the elements … they look great.”
Dave J, Washington
“I am very pleased with its performance. We feel it can be useful for a lot of our projects.”
See use picture.