MHI-INC Newsletter

Can't view Email?
Unsubscribe?


		Volume 6 \| April 28th, 2019	ISSUE #9

MHI Small Scale Microheaters^™ Micropyretics Heaters International [email protected] \| Tel. 513.772.0404

FibHeat200	FIB-THM-500	FIB-THM500-XRD

MHI Fiber Heaters may be used in both horizontal and vertical orientations. The Fiber Heaters are particularly useful for optical fiber processing, especially fiber coupler fabrication or tapering. For more information please give us a call at 513-772-0404 or contact us online.

1900°C Models (MC-1900-1)	1400°C Models (GAXP^®)

All of MHI's Microheaters^TM utilize patented NanoFractalAlumina^TM and Fractalins^TM materials, allowing for higher performance. To better understand which Microheater^TM line is best for your application, feel free to give us a call at 513-772-0404 or contact us online

IG-3-SS-1400

NEW ITEM
Slot Heater
Power: 200W
Type: GAXP Heater
Maximum Rated Temperature: 1000C
Dimensions 1.13' x1.13' x 2.13"
Slot length: 12 mm
Stainless Steel Casing
T/C included

THM-200-Microtube

Integrated thermocouple
Max temperature* ~ 1700°C
Complete Range of Electronic Controls
Connector accessories

Microtube^TM Heater - Part # THM-200 with 2mm ID quartz tube Picture shown is with MHI calibration thermocouple (optional)*

Microheaters Applications

The objective of using free radiating devices is to maximize the radiative POWER transfer from the heating elements. If the heating element is covered with insulation, the objective of the user changes to obtain a certain temperature inside the insulated region. The control for temperature inside a chamber or power maximization in a free radiating mode can be made with MHI temperature and/or power controllers. For either objective, one cannot exceed the rated temperature of the heating element. More...

For obtaining maximum temperature MHI controls are highly recommended. Large diameter GAXP® microheaters could develop some springiness from induced magnetic forces. Potting in ceramic paste is allowed as long as care is taken to factor-in the loss of any thermocouple response in the measured temperature. Note element temperature will be higher and maximum element temperature should not be exceeded. In the free radiation mode the power can be maximized.

Versatile high temperature HeatPad^™ is available in many sizes. Maximum plate surface depends on load. Non-reactive ceramic pocket type design allows for inserting, hanging, and positioning your HeatPad^™ virtually anywhere. More...

MHI Small Scale Microheater^™ Heaters

All of MHI's Microheaters^™ utilize patented NanoFractalAlumina^™ and Fractalins^™ materials, allowing for higher performance. Standard Microheaters^™ are shown.Custom or special orders are available for many models. To better understand which Microheater^™ line is best for your application, Contact us or call 513-772-0404.

DID YOU KNOW?
The world today has approximately 7 Billion People. We use energy to sustain our bodies and to do useful things that improve the quality of life. The way we use energy is to convert it from one form to another. However, we create bad waste products in the process of energy conversion - such as excessive CO2 when we combust something. The quality of available energy is continuously decreasing although the total amount remains the same. The annual energy consumption is ~500+EJ/A ( Exajoules/Annum). This amount is expected to peak at~600EJ/A in the year 2030 In the future, a large part of the savings of high quality energy will come from smart machines that use lesser energy for the same objective, thus reducing the rate of energy degradation. (see e.g. www.mhi-inc.com). Did you know? Significant energy savings are expected in the future from tribological improvements (sometimes estimated as high as 100EJ/A) just with new surface technologies?

Need Heating Elements?

U Shape

90° Bend

45° Bend

MHI is a manufacturer and direct supplier of patented (MoSi2) Molybdenum Disilicide electric heating elements.

No Pest^™ Technology: helps resist oxidation (pesting), improving element life and performance.
High Emissivity: our elements emit more energy per surface area.
MP1850: long life, high temperature upgrade. Replace 1800°C elements with MHI MP1850.
High Surface Load: capable of handling a high electrical power per length.
High Creep Resistant: less element distortion in complex elements.
Technology Leader: the first to market with 1850°C MoSi2 elements and the only patent protected 1900°C MoSi2 elements in the world.
Flexible Manufacturing: the ability to fulfill high-volume and low-volume orders.
Please check our Online Store

MHI Small Scale Microheaters™

FibHeat200

FIB-THM-500

FIB-THM500-XRD

IG-3-SS-1400

THM-200-Microtube

THM-200-Microtube

Microheaters Applications

MHI Small Scale Microheater™ Heaters

DID YOU KNOW?

Need Heating Elements?

MHI Small Scale Microheaters^™

MHI Small Scale Microheater^™ Heaters