Description
Set of 6 Elements
Replacement Elements Model T-G1 (MP1900/1850)
Please provide the Lu, Le, a information
Max element temp. 3362°F / 1850°C to 1900°C. Low surface load is required to use for higher than 1850C.
**Le + Lu measurement not to exceed 15″ (if higher please click on this product)
The option for holders is for a set of holders and clips as appropriate for the site for the full set.
These elements are used for well-insulated furnaces between 1740°C-1800°C. Please note that a low surface load application is recommended.
MHI is a US manufacturer and direct supplier of Molybdenum disilicide (MoSi2) electric heating elements.
We offer intelligent elements that last longer and save energy without impacting total costs.
MHI’s MoSi2 elements feature patented technologies that differentiate them from the pack.
Our elements will exceed your expectations.
MHI Heating Elements
Large US Company
“I appreciate that you continue to follow up with me on this…………. they are working flawlessly! I’ve had employees bend them …………. running and they haven’t had a single hiccup. These are fantastic elements.”
Ron P., Cleveland
“Your elements have lasted at least 3X of the original mfg.”
C.K. , OH
“I’ve been using your elements for a long time and I have no complaints everything is working well.”
Researcher, Major US University
“…used at 1450°C… MHI MP1800 elements… ran over 2000 cycles… best ever seen by a long shot.”
M.G., PA
” I wanted to try your silicon carbide elements because I have been very happy with the performance of your molybdenum disilicide heating elements. Yep — I’ve been using them for a few years now.”
Researcher at another Major US University
“Now using in 7th year.” 2006
Note from MHI — We have been aware for some time that our elements are the best in the world, based on customer feedback. However even we were surprised by the life some users are getting from them. Users should recognize that the life depends on maximum temperature of use and other factors. MHI elements reach 1900°C… are we your supplier? (also see our articles in Technical Articles on how to choose the best element for maximum productivity).
Tim B, GA
“You make them so good, no need for replacement elements. It’s scary, they’re still going…”
William S, Illinois
“I’d like to thank you (and MHI-INC) for your efforts. I would like to let you know that I enjoyed working with your company. Your response time was very fast and you had the lowest price, XXX was second, and then there was XXXXXXX (who never called us back after repeated inquiries.)
Thanks again.”
SL, USA
“Very happy with elements. Lasting long time. Thanks”
JZ, USA
“As far as I am concerned you have the best elements in the world”
Leo M, Pennsylvania
“We are very happy with the heating elements, the MP1800™ last for us. MHI has supported us completely with very good service.”
“I would like to thank Kevin and MHI for recommending the use … (Petrox™) elements. These new elements have been very successful in our process. We could not perform our Preventative Maintenance on our ovens without the use of these elements. When we would check our connections we would break the ends of our elements due to the fact that they would adhere to the elements that are connected to braided straps. It’s been a great help.
Thanks again, Leo.”
Kevin R, Ohio
“We put your elements in all our furnaces…”
Drew R, Colorado
“6/10 works great, you are my preferred supplier.”
Edward L,Tennessee
“The square 6/10 elements are still lasting. I always recommend them.”
Mark, Ohio
“Your elements have out lasted the competition in our furnace!”
Alan F, Canada
“Your specialty elements are the best we’ve used.”
Arletta M, North Carolina
“Your elements are superior compared to our previous supplier.”
Drew R, Colorado
“You guys are great! Your elements last a long time.”
Jack K, California
“Your elments last usually 8-10 months.”
MHI Inc
MHI Inc. USA
MHI Inc. USA