MHI Scholarly References

We respectfully salute the authors

Published Articles Regarding MHI Products, Technology and Energy Efficiency Uses

(Updated December 6, 2023).
Please contact MHI for Detailed Product List or Patent Information.

An Entropy Generation Rate Model for Tropospheric Behavior
That Includes Cloud Evolution

Entropy 2023

Cascade e-Ion PlasmaTM: A Novel Technique for Enhancing the Corrosion Resistance of High Carbon Steels

JOM- November 2023

[HTML] Phase equilibria in the ZrO2–HfO2–Nd2O3 system at 1500° C and 1700° C

Open Ceramics, 2023 – Elsevier

Inactivation of Enterococcus faecium and Geobacillus stearothermophilus spores on stainless steel through dry sanitation approaches using superheated steam and …

Food Control, 2024 – Elsevier

[PDF] researchgate.net

[HTML] sciencedirect.com

[HTML] Efficacy of Short Thermal Treatment Time Against Escherichia coli O157: H7 and Salmonella on the Surface of Fresh Beef

Journal of Food Protection, 2023 – Elsevier

Observation of Initial Burst Release of Fission Gas from High-Burnup UO2 Nuclear Fuel During Thermal Transient

Journal of Nuclear Materials, 2023 – Elsevier

[PDF] odu.edu

[PDF] HIGH TEMPERATURE OXIDATION OF EARLY TRANSITION METALS AND CARBIDES IN HYPERSONIC-RELEVANT CONDITIONS

Isothermal Sections of the Zro2–Hfo2–Eu2o3 Ternary Diagram at 1500° С and 1700° С

Available at SSRN … – papers.ssrn.com

Effect of TiO2 as sintering additive on microstructural, physical, and mechanical properties of CeO2 doped zirconia toughened alumina ceramic composite

Ceramics …, 2023 – Elsevier

[PDF] mst.edu

A high-strength precipitation hardened cobalt-free high-entropy alloy

Materials Science and …, 2023 – Elsevier

A high-strength precipitation hardened cobalt-free high-entropy alloy

Materials Science and …, 2023 – Elsevier

Effects of sintering temperature and zirconia content on the mechanical and microstructural properties of MgO, TiO2 and CeO2 doped alumina–zirconia (ZTA) …Journal of the Korean …, 2023 – Springer.

Computational fluid dynamics analysis of superheated Steam’s impact on temperature and humidity distribution within enclosed dry food processing spaces, Journal of Food Engineering, 111718, 2023

Superheated steam effectively inactivates diverse microbial targets despite mediating effects from food matrices in bench-scale assessments, International Journal of Food Microbiology 378, 109838, 2023

Influence of Superheated Steam Temperature and Moisture Exchange on the Inactivation of Geobacillus stearothermophilus Spores in Wheat Flour-Coated Surfaces, Food and Bioprocess Technology 15 (7), 1550-1562, 2022

Inactivation of Geobacillus stearothermophilus Spore in Flour on Different Food Processing Surfaces during Superheated Steam Treatment: Influence of Heat …IAFP 2021

[PDF]Efficacy of Short Thermal Treatment Time Against Escherichia coli O157:H7 and Salmonella on the Surface of Fresh Beef

[PDF] Influence of Superheated Steam Temperature and Moisture Exchange on the Inactivation of Geobacillus stearothermophilus Spores in Wheat Flour-Coated Surfaces

[HTML] Phase equilibria in the ZrO2–HfO2–Sm2O3 system at 1500° С

[PDF] researchgate.net

Effects of sintering temperature and zirconia content on the mechanical and microstructural properties of MgO, TiO2 and CeO2 doped alumina–zirconia (ZTA) ceramic

Porous carbon fibers from gel-spun polyacrylonitrile and poly (methyl methacrylate)-block-poly (acrylonitrile)

[HTML] rsc.org

[HTML] Low-temperature CO oxidation over Rh/Al 2 O 3 in a stagnation-flow reactor

[PDF] osti.gov

[PDF] Development and Standup Testing of a System to Observe Fission Gas Release During Transient Heating of Nuclear Fuel Element Segments

[PDF] liebertpub.com

Lower Cost Lunar Bricks: Energetics of Melting and Sintering Lunar Regolith Simulants

[PDF] mdsoar.org

Multiscale Tensile Characterization and Repeatability of Additively Manufactured 17-4 PH Stainless Steel

Effect of TiO2 as sintering additive on microstructural, physical, and mechanical properties of CeO2 doped zirconia toughened alumina ceramic composite

[PDF] archive.org

[PDF] Journal of Chemistry and Technologies

The DSP concentrate sinter-leach process for aluminium and sodium recovery 1

DERIVATION, EXPLORATION AND EVALUATION OF NON-EQUIATOMIC HIGH ENTROPY ALLOYS

[PDF] dnu.dp.ua

ІЗОТЕРМІЧНИЙ ПЕРЕРІЗ ДІАГРАМИ СТАНУ СИСТЕМИ ZrO2–HfO2–Sm2O3 ПРИ 1600° C

Direct Tension and Fatigue Characterization of Additively Manufactured Ti-6Al-4V Defects: A Microsample Approach

[PDF] mdpi.com

Synthesis of Boron Carbide Powder via Rapid Carbothermal Reduction Using Boric Acid and Carbonizing Binder

The method for efficiently releasing samarium vapor to generate artificial plasma clouds in the ionosphere

Fuel Regression Studies of a Miniature Optically Accessible Solid Fuel Ramjet Slab Burner

[PDF] mdpi.com

Aluminide Diffusion Coatings on IN 718 by Pack Cementation

[PDF] um.edu.mo

Surface hardness and corrosion behavior of laser surface-alloyed Ti6Al4V with copper

[PDF] researchgate.net

Nickel Aluminide intermetallic composites fabricated by various processing routes–a review

[PDF] unlp.edu.ar

Desarrollo y propiedades de cerámicos zirconia/vidrio bioactivo con aplicaciones odontológicas

Streamlined plug-in aerosol prototype for reconfigurable manufacture of nano-drug delivery systems

Streamlined plug-in aerosol prototype for reconfigurable manufacture of nano-drug delivery systems

 Biomaterials, 2022 – Elsevier

Influence of Superheated Steam Temperature and Moisture Exchange on the Inactivation of Geobacillus stearothermophilus  Spores in Wheat Flour‑Coated Surfaces.

Food and Bioprocess Technology, Springer, 2022
https://doi.org/10.1007/s11947-022-02830-3

Effects of sintering temperature and zirconia content on the mechanical and microstructural properties of MgO, TiO2 and CeO2 doped alumina–zirconia (ZTA) ceramic

Journal of the Korean …, 2022 – Springer

Apr 6, 2022  

Porous carbon fibers from gel-spun polyacrylonitrile and poly (methyl methacrylate)-block-poly (acrylonitrile)

Carbon, 2022 – Elsevier

Lower Cost Lunar Bricks: Energetics of Melting and Sintering Lunar Regolith Simulants

New Space, 2022 – liebertpub.com

The DSP concentrate sinter-leach process for aluminium and sodium recovery 1

Mineral Processing and …, 2022 – Taylor & Francis

Phase equilibria in the CeO2–La2O3–Ln2O3 system at 1250 and 1500° С,  2021

[HTML]Synthesis of carbon nitride (g-C 3 N 4 ) sciencedirect.com

[HTML] Self-assembled carbon spheres prepared from abundant lignin and urea for photocatalytic and self-propelling applications, 2021

[PDF] researchgate.net

[PDF] Carbon Trends, 2021

High temperature isotropic and anisotropic etching of silicon carbide using forming gas, 2021

[HTML] scirp.org

[HTML] Preparation and Characterization of La2O3 Doped Ba0.3Sr0.7TiO3 Perovskite Ceramics of Varied Sintering Temperature and Doping, 2021

Fission product release tests with uranium dioxide fuel and lead under conditions related to reactor accidents for lead-cooled reactors, 2021

[HTML] rsc.org

[HTML] The effect of ZnO particle lattice termination on the DC conductivity of LDPE nanocomposites, 2021

[PDF] arxiv.org

A combinatorial guide to phase formation and surface passivation of tungsten titanium oxide prepared by thermal oxidation, 2021

High-Temperature Performance of Next-Generation Silicon Carbide Fibers for CMCs, 2021

[PDF] sciencedirect.com

Effects of annealing on fission fragment release from electrodeposited Cf-252 thin-films, 2021

Floating Photocatalysts for Effluent Refinement Based on Stable Pickering Cellulose Foams and Graphitic Carbon Nitride (gC3N4), 2021

[PDF] ohiolink.edu

Performance of a Silicon-Carbide Heated Furnace and Activation at High Neutron Flux, 2021

[PDF] utexas.edu

Device and process development of SiC lateral power devices, 2021

Thermal energy storage radiatively coupled to a supercritical Rankine cycle for electric grid support, 2021

Industrial heating apparatus and method employing fermion and boson mutual cascade multiplier for beneficial material processing kinetics
2020 – Google Patents

Steam treatment of soil
2020 – Google Patents

System and method for heating the ground
Google Patents

A combinatorial guide to phase formation and surface passivation of tungsten titanium oxide prepared by thermal oxidation
Acta Materialia, 2020 – Elsevier

Micro-heating conductor
2020 – Google Patents

Fission product release tests with uranium dioxide fuel and lead under conditions related to reactor accidents for lead-cooled reactors
Annals of Nuclear …, 2020 – Elsevier

Effects of annealing on fission fragment release from electrodeposited Cf-252 thin-films
Nuclear Instruments and …, 2020 – Elsevier

Vehicle-mounted aroma diffuser
YE Jianling, LIN Zengtong – US Patent 10,624,980, 2020 – Google Patents

The effect of ZnO particle lattice termination on the DC conductivity of LDPE nanocomposites
Materials …, 2020 – pubs.rsc.org

Thermal energy storage radiatively coupled to a supercritical Rankine cycle for electric grid support
Renewable Energy, 2020 – Elsevier

Floating Photocatalysts for Effluent Refinement Based on Stable Pickering Cellulose Foams and Graphitic Carbon Nitride (gC3N4)
ACS …, 2020 – ACS Publications

Water separation device for engine exhaust gas
2020 Google Patents

Wireless imaging system comprising a head unit and a light cable that comprises an integrated light source
2020 – Google Patents

Internal cladding in sapphire optical device and method of making same
2020 – Google Patents

Wireless imaging system comprising a head unit and a light cable that comprises an integrated light source
2020 – Google Patents

A combinatorial guide to phase formation and surface passivation of tungsten titanium oxide prepared by thermal oxidation

S SiolN Ott, C Beall, M Stiefel, Y Unutulmazsoy… – Acta Materialia, 2020

Effects of annealing on fission fragment release from electrodeposited Cf-252 thin-films

KG MyhreJD Burns, NJ Sims, DW Stracener… – Nuclear Instruments and …, 2020

Thermal energy storage radiatively coupled to a supercritical Rankine cycle for electric grid support

Stabilization study of polyacrylonitrile/cellulose nanocrystals composite fibers

H ChangJ LuoHC LiuS ZhangJG Park… – ACS Applied Polymer …, 2019 – ACS Publications

Surfaces having tunable asperities and methods

 US 2019 / 0210271 A1…2019

Effect of Steam Temperature and Pressure on the Oxidation of Potential Coating Alloy FeCrAl for Supercritical Water-Cooled Reactor Application

B Xiao, X Huang, Q Yang… – Journal of …, 2019 – … .asmedigitalcollection.asme.org

Irrigation injector

US Patent App. 29/625,318, 2019 – Google Patents

Infrared heat lamp assembly

US Patent App. 10/264,629, 2019 – Google Patents

Apparatus for operando x-ray diffraction of fuel electrodes in high temperature solid oxide electrochemical cells

JD BenckD RettenwanderA Jackson… – Review of Scientific …, 2019 – aip.scitation

Iron/zinc doped 8 mol% yttria stabilized zirconia electrolytes for the green fuel cell technology: A comparative study of thermal analysis, crystalline structure …

Materials Chemistry and Physics, 2019 – Elsevier

Apparatus for operando x-ray diffraction of fuel electrodes in high temperature solid oxide electrochemical cells

– Review of Scientific …, 2019 – aip.scitation.org

A detailed investigation on the thermo-physical and rheological behavior of MgO/TiO2 aqueous dual hybrid nanofluid

Journal of Molecular Liquids, 2019 – Elsevier

Rheological investigation of lunar highland and mare impact melt simulants

Icarus, 2019 – Elsevier

Effects of temperature and particles volume concentration on the thermophysical properties and the rheological behavior of CuO/MgO/TiO2 aqueous ternary hybrid …

Journal of Thermal Analysis and … – Springer

Polyacrylonitrile sheath and polyacrylonitrile/lignin core Bi-component carbon fiber

Carbon, 2019 – Elsevier

Applications of Dry Vapor Steam Cleaning Technique for Removal of Surface Contaminants

Developments in Surface Contamination and Cleaning …, 2019 – Elsevier

THERMO-MECHANICALLY TUNABLE ASYMMETRIC SPLIT RING RESONATORS FOR NEMS-BASED INFRARED METAMATERIALS

Sinterability of 8 mol% Yttria Stabilized Zirconia

Yttria stabilized tetragonal zirconia ceramics: preparation, characterization and applicationspplications

Design and Development of Test Rigs for Experimental Investigation of Flow Loss and Heat Transfer in a Stirling Engine Heater Head

Effect of water density/pressure on the corrosion behavior of 304 and 310 stainless steels

Conductivity Characterizationof Iron Oxide Doped 8 mol% Yttria Stabilized Zirconia

Iron/zinc doped 8 mol% yttria stabilized zirconia electrolytes for the green fuel cell technology: A comparative study of thermal analysis, crystalline structure …

Investigating Potential Accident Tolerant Fuel Cladding Materials and Coatings

Microwave-assisted synthesis and dielectric properties of Al2O3–MgAl2O4 spinel composites from iron-sand

Synthesis of zinc oxide nanorods via the formation of sea urchin structures and their photoluminescence after heat treatment

Clean green energy electric protectors for materials

High‐temperature effects on the light transmission through sapphire optical fiber

Effect of MgO on the physical, mechanical and microstructural properties of ZTA-TiO2 composites

Oxygen diffusion mechanisms during high‐temperature oxidation of ZrB2‐SiC

Quasi-Distributed Temperature Sensing Using Type-II Fiber Bragg Gratings in Sapphire Optical Fiber to Temperatures up to 1300° C

Rheological investigation of lunar highland and mare impact melt simulants

Yttrium disilicate as environmental barrier coating for silicon nitride-based glow plug

PREPARATION OF SINTERED 237NpO2 PELLETS FOR IRRADIATION TO PRODUCE 238Pu

Testing of Sapphire Optical Fiber and Sensors in Intense Radiation Fields When Subjected to Very High Temperatures

Evaluation of Optical Fiber Sensors in High Temperature and Nuclear Reactor Environments

Experimental Investigation of Fundamental Viscosity, Density, and Leaching Characteristics of Sodium-Iron-Silicate Slags

Ignition and wave processes in combustion of solids

Effect of Water or Steam Pressure on the Oxidation Behavior of ALLOY 625 AND A286 AT 625°C.  (Product Category: Steam)

Effect of Pressures on the Corrosion Behaviors of Materials at 625C,   (Product Category: High temperature superheated steam)

Effect of 3 mol% Yttria Stabilized Zirconia Addition on Structural and Mechanical Properties of Alumina-Zirconia Composites (Product Category: Box Furnace)

Daub K., Persaud S.Y., Rebak R.B., Van Nieuwenhove R., Ramamurthy S., Nordin H. (2018) Investigating Potential Accident Tolerant Fuel Cladding Materials and Coatings. In: Jackson J., Paraventi D., Wright M. (eds) Proceedings of the 18th International Conference on Environmental Degradation of Materials in Nuclear Power Systems – Water Reactors. EDM 2017. The Minerals, Metals & Materials Series. Springer, Chamhttps://doi.org/10.1007/978-3-319-68454-3_19,

Thomaz, D.T., Guiotoku, M., Hotza, D. et al. J Mater Sci: Mater Electron (2017) 28: 17131. https://doi.org/10.1007/s10854-017-7640-9

Effect of MgO on the physical, mechanical and microstructural properties of ZTA-TiO2 composites. Materials Science and Engineering: A, https://doi.org/10.1016/j.msea.2017.09.048, Volume 707, 7 November 2017, Pages 118-124

Effect of 3 mol% Yttria Stabilized Zirconia Addition on Structural and Mechanical Properties of Alumina-Zirconia Composites Materials Sciences and Applications, 2017, 8, 584-602 http://www.scirp.org/journal/msa ISSN Online: 2153-1188 ISSN Print: 2153-117X

Antimicrobial and anticorrosive efficacy of inorganic nanoporous surfaces (Product Category: Cascade e-Ion)

Effect of Steam Pressure on the Oxidation Behaviour of Alloy 625  (Product HGA-S-01)

Achieve rapid heating with this furnace’s ionic flame (Product E-Ion)

Texture Creation.  Tunable coefficient of friction with surface texturing in materials engineering and biological systems, 2018 (Product)

Low-density and high-modulus carbon fibers from polyacrylonitrile with honeycomb structure (Product HGA-S-01)

Methane steam reforming in a novel ceramic microchannel reactor (Product HGA)

Miniaturized fiber taper reflective interferometer for high temperature measurement (Fiber Heater)

Preparation of low density hollow carbon fibers by bi-component gel-spinning method (Product HGA)

https://open.library.ubc.ca/cIRcle/collections/ubctheses/24/items/1.0362389 (Product)

Characterization of Respirable Uranium Aerosols from Various Uranium Alloys in Fire Events (Glow Panels)

Effect of water density on the oxidation behavior of alloy A-286 at 625° C–A TEM study (Product HGA)

Absolute concentration measurements of atomic oxygen in a flame using radar REMPI

Online helical fabrication scheme of helical long fiber grating for liquid level sensing (Fiber Heater Usage)

Mullite Formation in Al2O3/SiO 2/SiC Composites for Processing Porous Radiant Burners

Nanofractal refractories. Safe Insulation/FiberFree.  Furnaces.

Wireless passive temperature sensors using integrated cylindrical resonator/antenna for harsh-environment applications

Small Scale Experiments on Boiling Liquid Expanding Vapor Explosions: Supercritical BLEVE (Product HGA)

SiC Depletion in ZrB2–30 vol% SiC at Ultrahigh Temperatures

Testing of Sapphire Optical Fiber and Sensors in Intense Radiation Fields When Subjected to Very High Temperatures. Fuel Cycle Research and Development Thomas Blue The Ohio State University.

Gel spun PAN/CNT based carbon fibers with honey-comb cross-section

Combustion/micropyretic synthesis of atomically thin two-dimensional materials for energy applications

Diode-laser measurements of linestrength and temperature-dependent lineshape parameters for H2O transitions near 1.4 μm using Voigt, Rautian, Galatry, and …

Experimental results and modeling of energy storage and recovery in a packed bed of alumina particles

Packed bed thermal energy storage: A simplified experimentally validated model (Thermodynamics)

A low-profile wireless passive temperature sensor using resonator/antenna integration up to 1000 C

BLEVE overpressure: multiscale comparison of blast wave modeling

In Situ Gamma Radiation‐Induced Attenuation in Sapphire Optical Fibers Heated to 1000° C (Fiber Heaters)

In Situ thermally induced attenuation in sapphire optical fibers heated to 1400 C (Fiber Heaters)

Autothermal reforming of methane for syngas production in a novel ceramic microchannel reactor (Product Tube Furnace)

Nanoparticle Growth and Transport in Gas Phase( MTA925 for energy storage)

Sintering and Reaction Behaviour in Ni-Ti Powder Mixtures

Dissipative Belousov–Zhabotinsky reaction in unstable micropyretic synthesis

NANOCRYSTALLINE BORON CARBIDE POWDER SYNTHESIZED VIA CARBOTHERMAL REDUCTION REACTION

A three-step synthesis process of submicron boron carbide powders using microwave energy

A Numerical Model for the Combustion Synthesis of Titanium Aluminide in the Self-Propagating Mode

Solid-flame: Experimental validation

Final Technical Report DOE/SBIR/Phase I Title: HIGH TEMPERATURE NANOSTRUCTURED MoAlSi COATINGS ON ALLOYS

Effect of milling on the combustion synthesis of ternary system B 2 O 3, Mg and C

The Obtaining of the Intermetallic Compounds of Ni-Al System by Self-Propagating High Temperature Synthesis and Thermal Explosion

Fabrication of single-phase NiTi by combustion synthesis of mechanically activated powders

A novel route to obtain B 4 C nano powder via sol–gel method

Phase evolution during the reactive sintering of ternary Al–Ni–Ti powder compacts

Science and Technology of Interfaces, International Symposium in Honor of Dr. Bhakta Rath

Computer Simulation of Diffusion and Reaction in Metallic Nanoparticles

New insights into strobe reactions: An intriguing oscillatory combustion phenomenon

Effect of saccharides as carbon source on the synthesis and morphology of B4C fine particles from carbothermal synthesis precursors

High temperature coatings based on beta-NiAl

25th Anniversary Article: MXenes: A New Family of Two‐Dimensional Materials

Wireless Passive Temperature Sensors using Integrated Cylindrical Resonator/Antenna for Harsh-Environment Applications

MTA925 for energy storage

Cambridge Journals Online – Abstract – Copper Tungstate (CuWO4)–Based Materials for Photoelectrochemical Hydrogen Production

Effect of Thermal Treatment on the Crystallographic, Surface Energetics, and Photoelectrochemical Properties of Reactively Cosputtered Copper Tungstate for Water Splitting – The Journal of Physical Chemistry C (ACS Publications)

In-core temperature measurement for the PBMR using fibre-bragg gratings

Matter (Rio de Janeiro) – Fabrication and characterization of alumina foams for application in porous radiant burners

Solid State High Authority Telescoping Actuators

ScienceDirect.com – Composites Science and Technology – Piezoceramic hollow fiber active composites

Microchannel steam-methane reforming under constant and variable surface temperature distributions

InTech-Miniature Engineered Tapered Fiber Tip devices by focused ion beam micromachining

IEEE Xplore – A Low-Profile Wireless Passive Temperature Sensor Using Resonator/Antenna Integration Up to 1000 C

Thin-Film Thermocouples Based on the System In2O3–SnO2 – Chen – 2010 – Journal of the American Ceramic Society – Wiley Online Library

Thermoelectric Properties of ZnxInyOx + 1.5y Films

Design and Analysis of Alternative High Heat Flux Sources for Materials Fire Testing – PREPRINT

IEEE Xplore – Fast surface temperature measurement of Teflon propellant-in-pulsed ablative discharges using HgCdTe…

Gasification of biomass, coal, and petroleum coke at high heating rates and elevated pressure

Copper Tungstate (CuWO 4)–Based Materials for Photoelectrochemical Hydrogen Production

Miniature Engineered Tapered Fiber Tip Devices by Focused Ion Beam Micromachining

The energy-efficient processing of fine materials by the micropyretic synthesis route

Characterization of SiCN ceramic material dielectric properties at high temperatures for harsh environment sensing applications

Wireless passive high-temperature sensor based on multifunctional reflective patch antenna up to 1050 degrees centigrade

Comparative Study of Materials’ Behaviour in Supercritical W ater and Superheated Steam

Efficient 10-Fold Upconversion through Steady-State Non-Thermal-Equilibrium Excitation

Corrosion Performance of Candidate Materials for Canadian Gen IV Supercritical Water Cooled Reactor

How heat alters underlying deposits and implications for archaeological fire features: A controlled experiment

Calcium looping process for clean coal conversion: design and operation of the subpilot-scale carbonator

IMS–MS and IMS–IMS Investigation of the Structure and Stability of Dimethylamine-Sulfuric Acid Nanoclusters

Evanescent-mode-resonator-based and antenna-integrated wireless passive pressure sensors for harsh-environment applications

Integrated Microwave Resonator/antenna Structures for Sensor and Filter Applications

Oxide materials discovery for high temperature sensing and energy harvesting applications

The Effects of High Temperature and Nuclear Radiation on the Optical Transmission of Silica Optical Fibers

Graphite oxidation and damage under irradiation at high temperatures in an impure helium environment

Characterization of the Performance of Sapphire Optical Fiber in Intense Radiation Fields, when Subjected to Very High Temperatures (Fiber Heaters)

Optical microfiber know resonator and its slow light performance (Fiber Heaters)

A study of carbon based materials for energy applications

Autothermal reforming of methane for syngas production in a novel ceramic microchannel reactor

Nanoparticle Growth and Transport in Gas Phase

Sintering and Reaction Behaviour in Ni-Ti Powder Mixtures

Dissipative Belousov–Zhabotinsky reaction in unstable micropyretic synthesis

NANOCRYSTALLINE BORON CARBIDE POWDER SYNTHESIZED VIA CARBOTHERMAL REDUCTION REACTION

A three-step synthesis process of submicron boron carbide powders using microwave energy

A Numerical Model for the Combustion Synthesis of Titanium Aluminide in the Self-Propagating Mode

Solid-flame: Experimental validation (Product E-Ion)

Final Technical Report DOE/SBIR/Phase I Title: HIGH TEMPERATURE NANOSTRUCTURED MoAlSi COATINGS ON ALLOYS

Effect of milling on the combustion synthesis of ternary system B 2 O 3, Mg and C

The Obtaining of the Intermetallic Compounds of Ni-Al System by Self-Propagating High Temperature Synthesis and Thermal Explosion

Fabrication of single-phase NiTi by combustion synthesis of mechanically activated powders

A novel route to obtain B4C nano powder via sol–gel method

Phase evolution during the reactive sintering of ternary Al–Ni–Ti powder compacts

Science and Technology of Interfaces, International Symposium in Honor of Dr. Bhakta Rath

Computer Simulation of Diffusion and Reaction in Metallic Nanoparticles

New insights into strobe reactions: An intriguing oscillatory combustion phenomenon

Effect of saccharides as carbon source on the synthesis and morphology of B4C fine particles from carbothermal synthesis precursors

High temperature coatings based on beta-NiAl

25th Anniversary Article: MXenes: A New Family of Two‐Dimensional Materials

Wireless Passive Temperature Sensors Using Integrated Cylindrical Resonator/Antenna for Harsh-Environment Applications

MTA925 for energy storage: Experimental results and modeling of energy storage and recovery in a packed bed of alumina particles.

Applied Energy, Volume 119, 15 April 2014, Pages 521-529

Cambridge Journals Online – Abstract – Copper Tungstate (CuWO4)–Based Materials for Photoelectrochemical Hydrogen Production

Effect of Thermal Treatment on the Crystallographic, Surface Energetics, and Photoelectrochemical Properties of Reactively Cosputtered Copper Tungstate for Water Splitting – The Journal of Physical Chemistry C (ACS Publications)

In-core temperature measurement for the PBMR using fibre-bragg gratings

Matter (Rio de Janeiro) – Fabrication and characterization of alumina foams for application in porous radiant burners

Solid State High Authority Telescoping Actuators

ScienceDirect.com – Composites Science and Technology – Piezoceramic hollow fiber active composites

Microchannel steam-methane reforming under constant and variable surface temperature distributions

InTech-Miniature Engineered Tapered Fiber Tip devices by focused ion beam micromachining

IEEE Xplore – A Low-Profile Wireless Passive Temperature Sensor Using Resonator/Antenna Integration Up to 1000 C

Thin-Film Thermocouples Based on the System In2O3–SnO2 – Chen – 2010 – Journal of the American Ceramic Society – Wiley Online Library

Thermoelectric Properties of ZnxInyOx + 1.5y Films

Design and Analysis of Alternative High Heat Flux Sources for Materials Fire Testing – PREPRINT

IEEE Xplore – Fast surface temperature measurement of Teflon propellant-in-pulsed ablative discharges using HgCdTe…

IEEE Xplore – Ultra-small fiber taper Fabry-Perot modal interferometer

Redistribution of implanted dopants in GaN – Springer

Rapid Oxidation Characterization of Ultra-High Temperature Ceramics – Karlsdottir – 2007 – Journal of the American Ceramic Society – Wiley Online Library

FibHeat200-XRD – In-situ synchrotron x-ray transmission microscopy of the sintering of multilayers.  Link to https://aip.scitation.org/doi/abs/10.1063/1.4809602

Compact steamer

Method and apparatus for energy and water efficient labeling

Surfaces having tunable asperities and method

Materials having an enhanced emissivity and methods for making the same

Apparatus and method for sterilizing items

Apparatus and method for sterilizing items

Pressurized point-of-use superheated steam generation apparatus and method

Characterization of Respirable Uranium Aerosols from Various Uranium Alloys in Fire Events

Wireless passive temperature sensors using integrated cylindrical resonator/antenna for harsh-environment applications

System and method for treating a surface of media with a plurality of micro-heaters to reduce curling of the media

Effect of water or steam pressure on the oxidation behaviour of alloy 625 and a286 at 625° c

Apparatus and method for the characterization of respirable aerosols

Effect of Pressures on the Corrosion Behaviours of Materials at 625C

Apparatus and method for the characterization of respirable aerosols

Low-density and high-modulus carbon fibers from polyacrylonitrile with honeycomb structure

 Packed bed thermal energy storage: A simplified experimentally validated model

Effect of water density on the oxidation behavior of alloy A-286 at 625° C–A TEM study

Online fabrication scheme of helical long-period fiber grating for liquid-level sensing

IMSMS and IMS–IMS investigation of the structure and stability of dimethylamine-sulfuric acid nanoclusters

In Situ thermally induced attenuation in sapphire optical fibers heated to 1400 C

SiC Depletion in ZrB2–30 vol% SiC at Ultrahigh Temperatures

Efficient 10-Fold Upconversion through Steady-State Non-Thermal-Equilibrium Excitatio

Foam heat exchanger for hot melt adhesive or other thermoplastic material dispensing apparatus

Diode-laser measurements of linestrength and temperature-dependent lineshape parameters for H 2 O transitions near 1.4 μm using Voigt, Rautian, Galatry, and …

Heating apparatus with a disinfection device

Nickel-based catalysts

s Synthesis of (21̅0) Oxygen-Terminated Defect-Free Hierarchical ZnO Particles and Their Heat Treatment

for Enhanced Reactivity

Polyethylene Nanocomposites for the Next Generation of Ultra-low Transmission-loss HVDC Cables: Insulations Containing Moisture-resistant MgO Nanoparticles

Knife for wood processing and methods for plating and surface treating a knife for wood processing

Vehicle cabin heating cooling and ventilation system

How heat alters underlying deposits and implications for archaeological fire features: A controlled experiment

Wireless passive high-temperature sensor based on multifunctional reflective patch antenna up to 1050 degrees centigrade

In Vitro Photochemical Induction of Kojic Acid-DNA Adducts

Nanoheater elements, systems and methods of use thereof

Silicon carbide-based porous body

Surgical sterilizing container and surgical fluid extraction device

Autothermal reforming of methane for syngas production in a novel ceramic microchannel reactor

Spray Pyrolysis for Synthesis of Nano Ceramic Powders Final Report

Nanoparticle Growth and Transport in Gas Phase

MHI on Google Scholar

More technical articles

MHI Funded Research and Related Articles (Partial List)

Ancient metal mirror alloy revisited: quasicrystalline nanoparticles observed

Materials engineering: The shape of materials engineering for the next 100 years

Antimicrobial and anticorrosive efficacy of inorganic nanoporous surfaces

Interfacial instability of a planar interface and diffuseness at the solid-liquid interface for pure and binary materials

Nanostructured surfaces that show antimicrobial, anticorrosive, and antibiofilm properties

Morphological assessment with the maximum entropy production rate (MEPR) postulate

The description of morphologically stable regimes for steady state solidification based on the maximum entropy production rate postulate

US energy production activity and innovation

Decay-dissipative Belousov–Zhabotinsky nanobands and nanoparticles in NiAl

New relationships between patents and technological innovation: Modeling patent activity as a driver of innovation

Partial Patent List

9,950,36..  ..Clean Green……Materials

9,730,27.… special flat heating configurations

9, 643, 87….  Thermal Plasma Treatment

9,376,77… Antimicrobial materials and coatings

9,261,27…. pressurized point-of-use superheated steam generation apparatus and method

9,249,49…….materials having an enhanced emissivity and methods for making the same

8,945,46…… apparatus and method for sterilizing items

8,940,24…… apparatus and method for sterilizing items

8,895,88…….anti-smudging, better gripping, better shelf-life of products and surfaces

8,652,40… heating and sterilizing apparatus and method for using same

8,435,45….. heating and sterilizing apparatus and method of using same

8,131,…..flexible die heater

8,119,95……convective heating system for industrial applications

7,880,11….. one sided electrode for manufacturing processes especially for joining

7,067,77……treatment for improving the stability of silicon carbide heating elements

6,816,67….. mid temperature plasma device

6,113,80….. compositions for and synthesis of improved insulations

6,099,97……molybdenum silicide-containing products with high emissivity

5,963,70….. hot air blower

10-15931….. antimicrobial materials and coatings (Korea)

33131….. apparatus and method for sterilizing items (Mexico)