Description
RR Robust Radiator Diameter 2″ Length 4″. This is the coil length and ID. At least 0.5″ extension on each side beyond coil length.
• Optional Tube with two end caps may be placed in the Robust Radiator. Tube will be mullite and end caps will be metal.
• Tube will protrude at least 1″ beyond the RR face. Tube is optional – supplied with end caps. Note ceramic plugs to limit heat loss (option CEC) but with an ability to maintain flow are offered also as option. These are recommended.
• Please note that the power available from the RR for heating is lower when a tube is placed in it
• The internal temperature in the tube will depend on the load in the tube
(Picture shows optional tube and SS shell). These have to purchased in the pull down menu.
The GRR will plug into a 208 or 220 V single phase supply. The control panel is optional. However if not purchased, the user should monitor the temperature so that it does not exceed 1200°C during use.
The control Panel BPAN-O-PLUS when purchased can be supplied in a UL or cUL rating. This control panel has a SCR, soft start and two read outs (one for process temperature and one for the over temperature function).