Shop Online
Search MHI
  • MHI Search
Temperature Converter

Enter a number
& click on
the "Calculate" button
°F= °C

 

MHI Scholarly References

Published Articles Detailing MHI Product,Technology and Energy Efficiency Uses

(Updated July 2017). Please contact MHI for detailed product or patent Information.

Effect of Water or Steam Pressure on the Oxidation Behavior of ALLOY 625 AND A286 AT 625°C.  (Product Steam)

Effect of Pressures on the Corrosion Behaviors of Materials at 625C,   (Product Category: High temperature superheated steam)

Effect of 3 mol% Yttria Stabilized Zirconia Addition on Structural and Mechanical Properties of Alumina-Zirconia Composites(Product Category: Box Furnace)

Antimicrobial and anticorrosive efficacy of inorganic nanoporous surfaces (Product Category: Cascade e-Ion)

Effect of Steam Pressure on the Oxidation Behaviour of Alloy 625  (Product HGA-S-01)

 

Achieve rapid heating with this furnace's ionic flame (Product E-Ion)

Low-density and high-modulus carbon fibers from polyacrylonitrile with honeycomb structure (Product HGA-S-01)

Methane steam reforming in a novel ceramic microchannel reactor (Product HGA)

Miniaturized fiber taper reflective interferometer for high temperature measureme (Fiber Heater)

Preparation of low density hollow carbon fibers by bi-component gel-spinning method (Product HGA)

Characterization of Respirable Uranium Aerosols from Various Uranium Alloys in Fire Events (Glow Panels)

Effect of water density on the oxidation behavior of alloy A-286 at 625° C–A TEM study (Product HGA)

Absolute concentration measurements of atomic oxygen in a flame using radar REMPI

Online helical fabrication scheme of helical long fiber grating for liquid level sensing (Fiber Heater Usage)

Mullite Formation in Al2O3/SiO 2/SiC Composites for Processing Porous Radiant Burners

Wireless passive temperature sensors using integrated cylindrical resonator/antenna for harsh-environment applications

Small Scale Experiments on Boiling Liquid Expanding Vapor Explosions: Supercritical BLEVE (Product HGA)

SiC Depletion in ZrB2–30 vol% SiC at Ultrahigh Temperatures

Gel spun PAN/CNT based carbon fibers with honey-comb cross-section

Combustion/micropyretic synthesis of atomically thin two-dimensional materials for energy applications

Diode-laser measurements of linestrength and temperature-dependent lineshape parameters for H2O transitions near 1.4 μm using Voigt, Rautian, Galatry, and …

Experimental results and modeling of energy storage and recovery in a packed bed of alumina particles

Packed bed thermal energy storage: A simplified experimentally validated model (Thermodynamics)

A low-profile wireless passive temperature sensor using resonator/antenna integration up to 1000 C

BLEVE overpressure: multiscale comparison of blast wave modeling

In Situ Gamma Radiation‐Induced Attenuation in Sapphire Optical Fibers Heated to 1000° C (Fiber Heaters)

In Situ thermally induced attenuation in sapphire optical fibers heated to 1400 C (Fiber Heaters)

Autothermal reforming of methane for syngas production in a novel ceramic microchannel reactor (Product Tube Furnace)

Nanoparticle Growth and Transport in Gas Phase( MTA925 for energy storage)

Sintering and Reaction Behaviour in Ni-Ti Powder Mixtures

Dissipative Belousov–Zhabotinsky reaction in unstable micropyretic synthesis

NANOCRYSTALLINE BORON CARBIDE POWDER SYNTHESIZED VIA CARBOTHERMAL REDUCTION REACTION

A three-step synthesis process of submicron boron carbide powders using microwave energy

A Numerical Model for the Combustion Synthesis of Titanium Aluminide in the Self-Propagating Mode

Solid-flame: Experimental validation

Final Technical Report DOE/SBIR/Phase I Title: HIGH TEMPERATURE NANOSTRUCTURED MoAlSi COATINGS ON ALLOYS

Effect of milling on the combustion synthesis of ternary system B 2 O 3, Mg and C

The Obtaining of the Intermetallic Compounds of Ni-Al System by Self-Propagating High Temperature Synthesis and Thermal Explosion

Fabrication of single-phase NiTi by combustion synthesis of mechanically activated powders

A novel route to obtain B 4 C nano powder via sol–gel method

Phase evolution during the reactive sintering of ternary Al–Ni–Ti powder compacts

Science and Technology of Interfaces, International Symposium in Honor of Dr. Bhakta Rath

Computer Simulation of Diffusion and Reaction in Metallic Nanoparticles

New insights into strobe reactions: An intriguing oscillatory combustion phenomenon

Effect of saccharides as carbon source on the synthesis and morphology of B4C fine particles from carbothermal synthesis precursors

High temperature coatings based on beta-NiAl

25th Anniversary Article: MXenes: A New Family of Two‐Dimensional Materials

Wireless Passive Temperature Sensors using Integrated Cylindrical Resonator/Antenna for Harsh-Environment Applications

MTA925 for energy storage

Cambridge Journals Online - Abstract - Copper Tungstate (CuWO4)–Based Materials for Photoelectrochemical Hydrogen Production

Effect of Thermal Treatment on the Crystallographic, Surface Energetics, and Photoelectrochemical Properties of Reactively Cosputtered Copper Tungstate for Water Splitting - The Journal of Physical Chemistry C (ACS Publications)

In-core temperature measurement for the PBMR using fibre-bragg gratings

Matter (Rio de Janeiro) - Fabrication and characterization of alumina foams for application in porous radiant burners

Solid State High Authority Telescoping Actuators

ScienceDirect.com - Composites Science and Technology - Piezoceramic hollow fiber active composites

Microchannel steam-methane reforming under constant and variable surface temperature distributions

InTech-Miniature Engineered Tapered Fiber Tip devices by focused ion beam micromachining

IEEE Xplore - A Low-Profile Wireless Passive Temperature Sensor Using Resonator/Antenna Integration Up to 1000 C

Thin-Film Thermocouples Based on the System In2O3–SnO2 - Chen - 2010 - Journal of the American Ceramic Society - Wiley Online Library

Thermoelectric Properties of ZnxInyOx + 1.5y Films

Design and Analysis of Alternative High Heat Flux Sources for Materials Fire Testing - PREPRINT

IEEE Xplore - Fast surface temperature measurement of Teflon propellant-in-pulsed ablative discharges using HgCdTe...

Gasification of biomass, coal, and petroleum coke at high heating rates and elevated pressure

Copper Tungstate (CuWO 4)–Based Materials for Photoelectrochemical Hydrogen Production

Miniature Engineered Tapered Fiber Tip Devices by Focused Ion Beam Micromachining

The energy-efficient processing of fine materials by the micropyretic synthesis route

Characterization of SiCN ceramic material dielectric properties at high temperatures for harsh environment sensing applications

Wireless passive high-temperature sensor based on multifunctional reflective patch antenna up to 1050 degrees centigrade

Comparative Study of Materials' Behaviour in Supercritical W ater and Superheated Steam

Efficient 10-Fold Upconversion through Steady-State Non-Thermal-Equilibrium Excitation

Corrosion Performance of Candidate Materials for Canadian Gen IV Supercritical Water Cooled Reactor

How heat alters underlying deposits and implications for archaeological fire features: A controlled experiment

Calcium looping process for clean coal conversion: design and operation of the subpilot-scale carbonator

IMS–MS and IMS–IMS Investigation of the Structure and Stability of Dimethylamine-Sulfuric Acid Nanoclusters

Evanescent-mode-resonator-based and antenna-integrated wireless passive pressure sensors for harsh-environment applications

Integrated Microwave Resonator/antenna Structures for Sensor and Filter Applications

Oxide materials discovery for high temperature sensing and energy harvesting applications

The Effects of High Temperature and Nuclear Radiation on the Optical Transmission of Silica Optical Fibers

Graphite oxidation and damage under irradiation at high temperatures in an impure helium environment

Characterization of the Performance of Sapphire Optical Fiber in Intense Radiation Fields, when Subjected to Very High Temperatures (Fiber Heaters)

Optical microfiber know resonator and its slow light performance (Fiber Heaters)

A study of carbon based materials for energy applications

Autothermal reforming of methane for syngas production in a novel ceramic microchannel reactor

Nanoparticle Growth and Transport in Gas Phase

Sintering and Reaction Behaviour in Ni-Ti Powder Mixtures

Dissipative Belousov–Zhabotinsky reaction in unstable micropyretic synthesis

NANOCRYSTALLINE BORON CARBIDE POWDER SYNTHESIZED VIA CARBOTHERMAL REDUCTION REACTION

A three-step synthesis process of submicron boron carbide powders using microwave energy

A Numerical Model for the Combustion Synthesis of Titanium Aluminide in the Self-Propagating Mode

Solid-flame: Experimental validation (Product E-Ion)

Final Technical Report DOE/SBIR/Phase I Title: HIGH TEMPERATURE NANOSTRUCTURED MoAlSi COATINGS ON ALLOYS

Effect of milling on the combustion synthesis of ternary system B 2 O 3, Mg and C

The Obtaining of the Intermetallic Compounds of Ni-Al System by Self-Propagating High Temperature Synthesis and Thermal Explosion

Fabrication of single-phase NiTi by combustion synthesis of mechanically activated powders

A novel route to obtain B4C nano powder via sol–gel method

Phase evolution during the reactive sintering of ternary Al–Ni–Ti powder compacts

Science and Technology of Interfaces, International Symposium in Honor of Dr. Bhakta Rath

Computer Simulation of Diffusion and Reaction in Metallic Nanoparticles

New insights into strobe reactions: An intriguing oscillatory combustion phenomenon

Effect of saccharides as carbon source on the synthesis and morphology of B4C fine particles from carbothermal synthesis precursors

High temperature coatings based on beta-NiAl

25th Anniversary Article: MXenes: A New Family of Two‐Dimensional Materials

Wireless Passive Temperature Sensors using Integrated Cylindrical Resonator/Antenna for Harsh-Environment Applications

MTA925 for energy storage

Cambridge Journals Online - Abstract - Copper Tungstate (CuWO4)–Based Materials for Photoelectrochemical Hydrogen Production

Effect of Thermal Treatment on the Crystallographic, Surface Energetics, and Photoelectrochemical Properties of Reactively Cosputtered Copper Tungstate for Water Splitting - The Journal of Physical Chemistry C (ACS Publications)

In-core temperature measurement for the PBMR using fibre-bragg gratings

Matter (Rio de Janeiro) - Fabrication and characterization of alumina foams for application in porous radiant burners

Solid State High Authority Telescoping Actuators

ScienceDirect.com - Composites Science and Technology - Piezoceramic hollow fiber active composites

Microchannel steam-methane reforming under constant and variable surface temperature distributions

InTech-Miniature Engineered Tapered Fiber Tip devices by focused ion beam micromachining

IEEE Xplore - A Low-Profile Wireless Passive Temperature Sensor Using Resonator/Antenna Integration Up to 1000 C

Thin-Film Thermocouples Based on the System In2O3–SnO2 - Chen - 2010 - Journal of the American Ceramic Society - Wiley Online Library

Thermoelectric Properties of ZnxInyOx + 1.5y Films

Design and Analysis of Alternative High Heat Flux Sources for Materials Fire Testing - PREPRINT

IEEE Xplore - Fast surface temperature measurement of Teflon propellant-in-pulsed ablative discharges using HgCdTe...

IEEE Xplore - Ultra-small fiber taper Fabry-Perot modal interferometer

Redistribution of implanted dopants in GaN - Springer

Rapid Oxidation Characterization of Ultra-High Temperature Ceramics - Karlsdottir - 2007 - Journal of the American Ceramic Society - Wiley Online Library

FibHeat200-XRD - In-situ synchrotron x-ray transmission microscopy of the sintering of multilayers

Compact steamer

 

Method and apparatus for energy and water efficient labeling

 

Materials having an enhanced emissivity and methods for making the same

 

Apparatus and method for sterilizing items

 

Apparatus and method for sterilizing items

 

Pressurized point-of-use superheated steam generation apparatus and method

 

Characterization of Respirable Uranium Aerosols from Various Uranium Alloys in Fire Events

 

Wireless passive temperature sensors using integrated cylindrical resonator/antenna for harsh-environment applications

 

System and method for treating a surface of media with a plurality of micro-heaters to reduce curling of the media

 

Effect of water or steam pressure on the oxidation behaviour of alloy 625 and a286 at 625° c

Apparatus and method for the characterization of respirable aerosols

Effect of Pressures on the Corrosion Behaviours of Materials at 625C

 

Apparatus and method for the characterization of respirable aerosols

 

Low-density and high-modulus carbon fibers from polyacrylonitrile with honeycomb structure

 

 Packed bed thermal energy storage: A simplified experimentally validated model

 

Effect of water density on the oxidation behavior of alloy A-286 at 625° C–A TEM study

 

Online fabrication scheme of helical long-period fiber grating for liquid-level sensing

 

IMS–MS and IMS–IMS investigation of the structure and stability of dimethylamine-sulfuric acid nanoclusters

 

In Situ thermally induced attenuation in sapphire optical fibers heated to 1400 C

 

SiC Depletion in ZrB2–30 vol% SiC at Ultrahigh Temperatures

 

Efficient 10-Fold Upconversion through Steady-State Non-Thermal-Equilibrium Excitation

 

Foam heat exchanger for hot melt adhesive or other thermoplastic material dispensing apparatus

 

Diode-laser measurements of linestrength and temperature-dependent lineshape parameters for H 2 O transitions near 1.4 μm using Voigt, Rautian, Galatry, and …

 

Heating apparatus with a disinfection device

 

Nickel-based catalysts

 

Aqueous Synthesis of (21̅0) Oxygen-Terminated Defect-Free Hierarchical ZnO Particles and Their Heat Treatment

for Enhanced Reactivity

 

Polyethylene Nanocomposites for the Next Generation of Ultra-low Transmission-loss HVDC Cables: Insulations Containing Moisture-resistant MgO Nanoparticles

 

Knife for wood processing and methods for plating and surface treating a knife for wood processing

 

Vehicle cabin heating cooling and ventilation system

 

How heat alters underlying deposits and implications for archaeological fire features: A controlled experiment

 

Wireless passive high-temperature sensor based on multifunctional reflective patch antenna up to 1050 degrees centigrade

 

In Vitro Photochemical Induction of Kojic Acid-DNA Adducts

 

Nanoheater elements, systems and methods of use thereof

 

Silicon carbide-based porous body

 

Surgical sterilizing container and surgical fluid extraction device

 

Autothermal reforming of methane for syngas production in a novel ceramic microchannel reactor

 

Spray Pyrolysis for Synthesis of Nano Ceramic Powders Final Report

 

Nanoparticle Growth and Transport in Gas Phase

MHI on Google Scholar

More technical articles

Partial Patent List

 

9,730,27.… special flat heating configurations

 

9, 643, 87….  Thermal Plasma Treatment

 

9,376,77… Antimicrobial materials and coatings

 

9,261,27…. pressurized point-of-use superheated steam generation apparatus and method

 

9,249,49…….materials having an enhanced emissivity and methods for making the same

 

8,945,46…… apparatus and method for sterilizing items

 

8,940,24…… apparatus and method for sterilizing items

 

8,895,88…….anti-smudging, better gripping, better shelf-life of products and surfaces

 

8,652,40… heating and sterilizing apparatus and method for using same

 

8,435,45….. heating and sterilizing apparatus and method of using same

 

8,131,…..flexible die heater

 

8,119,95……convective heating system for industrial applications

 

7,880,11….. one sided electrode for manufacturing processes especially for joining

 

7,067,77……treatment for improving the stability of silicon carbide heating elements

 

6,816,67….. mid temperature plasma device

 

6,113,80….. compositions for and synthesis of improved insulations

 

6,099,97……molybdenum silicide-containing products with high emissivity

 

5,963,70….. hot air blower

 

10-15931….. antimicrobial materials and coatings (Korea)

 

33131….. apparatus and method for sterilizing items (Mexico)

 

 

LinkedIn  Twitter  MHI Google Plus  Facebook  YouTube    MHI Certification

©Micropyretics Heaters International Inc. 1995 - 2017
750 Redna Terrace Cincinnati, OH 45215, USA
Telephone: 513-772-0404 | Fax: 513-672-3333