Description
Custom Small Microheater. IG24-400-1400.
The temperature is typically a maximum of 1400°C (2552°F). It is custom-made to order. The minimum supply time is 2 months after the order. The minimum quantity is six.
Low Amps, High-Temperature Materials GAXP-IgMp Hot Zone >1″
1″x ~1″ x 1/2″ envelope Robust Ignitor
Square-U-shaped G is ~10mm, and Hz is 12mm. The total length can be customized. The standard minimum length (L) is 25mm. The standard minimum “a” is ~24mm.
IG24 Microheater 1400°C
Rapidly heat – very high rate, 20-600C per second. About 10 to 15 seconds to glow temperature after maximum power.
Temperature: Maximum continuous Low Amps, High-Temperature Materials GAXP-IgMp Continuous temperature not to exceed 1400°C (2552°F)
Volts: 24V each.
Size of Microheater: Total Cylindrical Part ~ 2″ long** Lug region is 0.5″ on each side. Attach wires with optional M6 bolts shown.
Power: Up to 400W Power Control: An optional DC Power Controller is Offered.
Physical Details: The heater length is 0.5″ on each leg.
The maximum heater amps (~17 Amps to ~20 Amps) to temperature (which should be measured with a calibrated pyrometer).
Use for continuous heating or ignition.
Connectors:
Accessory Pack M6 Bolts (picture shown) may be added to the cart from the Available Options menu.
Manufacturer: MHI Inc.USA.
Patented Heater/Igniter/Glow Plug.
A TC-Read 120V is offered as an option (includes 12″ Thermocouple K Type sheathed – wire and plug)
Click for a higher-power linear microheater.
If a DC supply is required one may order from MHI or elsewhere. DC power supplies unlike the AC supply panel will not offer a feedback control.
Please note the following if a non-MHI supply is employed: Most DC power supplies max-out somewhere in their rated current or voltage (and power) but often allow independent control of each parameter – please check with supplier All these features will normally be called out be in the power-supply manual provided by the supply manufacturer.
The current should not exceed 17-20 amps for a SIG24-400-1400
The SIG24-400-1400 heater will glow close to its highest temperature for 17-20A current with a corresponding potential of ~18-24V in a free radiating mode. without insulation cover. Use for igniter or radiator.
An AC current controller enabled with a temperature feedback and power control mechanism may also be used instead of a DC power supply. The BPAN-O-PLUS is recommended as a possible AC controller. The main features of this AC control panel are listed on https://mhi-inc.com/PG4/electronic-controllers-control-panels.html. Please contact MHI at 513-772-0404 for more details.
Element GAXP-IgMp. The more accurate measurement technique at these temperatures is a radiation pyrometer.
Electricals: Maximum is 400 Watts.
The maximum temperature is achieved for ~ 17A with full power and maximum temperature when the IG24-400 is used in moderately free radiative conditions (upto 20A RMS meter read-out in fully free-radiating conditions)
A 24V minimum supply rated for 17 Amps (variable) is the minimum required for heating to glowing conditions.
A power supply is offered in the category of the optional item available for this microheater. This is the 24V DC (nominal) power generator/supply.
When requiring to power more than two such microheaters simultaneously, a BPAN-O or BPAN-O-PLUS with feedback control is recommended. Please contact MHI for details (513-772-0404).
Heating Rate: Instantaneous. The heater will start getting hot as soon as power is introduced to it. Typically one will notice a glow (i.e when it is above ~800°C) in the order of less than a minute when it is powered up in a normal manner.
Dimensions
The hot zones on each leg are 0.5″ long.
The rated amps and voltage are called out for use in a free radiating mode.
**Typical Supply Pictures Shown, Images are to be considered as approximate. Dimensions may not include the ring or fork part of the lugs.
If the size is smaller than required – then please click to S24-400-1500
Yes – the terminals will get hot but will take the heat.
MHI Microheaters
National Laboratory, USA
I have received the heater and control system, and it is all visually undamaged and exactly to my specifications. Thank you for your help!
Professor V.V. USA Surface Science Center, Ohio
discovery with the Cascade e-Ion Plasma is indeed very exciting and the potential for all sorts of applications is enormous.
C. N., USA
“Thanks very much for the quick and complete answers!”
Researcher at US National Laboratory
“MHI offers Microheaters that no other manufacturer can compare to.”
Senior Professor at Premier World University
“We have used the heater, it is working well. Do you have calibration chart (Temperature v/s Voltage) for this MC170 microheater. ……………..Since we do not have temperature measuring tool for such a high temperature (1900C)…………..We are planing to order one more heater………………….”
Senior Professor at United States Major Big 10 University
MHI ……. the only heating elements that work well for us in these studies; when we publish our results — I will be sure to send you the reference, I see your on your website that you link to work utilizing MHI products.
Product: THM and Robust Radiator..
Professor A. R., Academician, Ukraine
Several years ago we have bought in your company the front loading M18-40 furnace and two robust radiators and got much satisfaction working with them. Now, we believe, it is a very time to substitute heating elements in the furnace and to buy new radiators.
Product: RR and Furnace
B.K., Ohio Energy Efficiency Center
“I wanted to let you know that we were able to connect the heaters successfully with the help of your video. …The heaters are heating up like they should as far as we can tell…… ”
F.G., France
“We have received the Ultra Coil… the piece seems very nice once again. Thank you.”
P.M., Australia
“…the equipment arrived very quickly and in good order.”
Y.X. Canada
“Thank you for your email. We tested the microheater last week. It worked well…”
R. Sweden
“…I always give you my best recommendation for the prompt service and customer minded attitude…”
M.L., USA Government
“….. the customer service to date has been exceptional. Calls and e-mails are returned promptly, and your customers are well taken care of. We will definitely work with MHI again in the future.”
S.W. National Laboratory (Energy), USA Government
“….. , I just received the PH-G4-3.5 I ordered and it looks great. …..we’d like to purchase a controller for it as well.”
K.R., Sweden
“The heater looks great, and in tact so far!”……..“We received the ceramic holder today. Thank you very much. We appreciate your spontaneous enabling help I hope we can try the heater soon.”
Dr. M (United Kingdom)
…..”This should get me right back on track with this project – which has gone very well thanks to your assistance”.
Silicon Valley Customer
“Everything is great! I’ve inspected the elements and roof refractory and everything is in great condition”.
Start up US Company Supported by MHI Technology
“We plan on continuing our relationship with MHI to further develop and sustain a robust localized heat treat capacity”.
MHI Inc. USA
MHI Inc. USA
MHI Inc. USA
MHI Inc. USA