MHI MTA925 Process Air/Gas Heater (4kW).
When selecting flow meter please indicate Air or Nitrogen in the remarks column.
Continuous Hot Air Discharge up to 925°C (Nominal),1000°C.
4 kW Total Power (Nominal @ 240V)
Stainless Steel Shell Construction. ~1 Atmosphere shell use.
Built-In “K” Type Process Thermocouple
240V Plug-In Design. Use 208-240V. 50/60Hz.
Ready to Use.
Threaded exit nozzle 2″ NPT Male.
The Optional Mixer Nozzle provides gas inlets at the Airtorch® exit. Optional Mixer Nozzle (see picture). Three way input. Nozzle is insulated with insulation for 1400C.
Full Power and Flow Controller Options Available
Independent Power and Flow Control Available (optional).
BPAN-O-PLUS models have a temperature and over-temperature control. Choose cUL for Canada option.
For MTA models when the inlet flow is pressure driven, the flow rate is often pre-set by an appropriate SCFM flow meter.
Minimum flow rate should be maintained. MHI BPAN-O-PLUS power controllers can be used to set temperature and/or power.
- * Please note that shipping price is an estimate and normally quoted only for US shipping. Your acknowledgement may contain an amended shipping price that reflects a more accurate price for the shipping.